Building Instructions
Select a smooth, level site for your Easy Up
Always use 2 people to unfold.
Take the frame on the 3m sides, take the enter scissors beam.
Grap the lower beam, both lift up the frame a little and pull out.
Stop pull out on the half, before cneter peak comes up
Add the rooftop fabric on the frame
Attach the middle of the fabric on the peak pole. On this way the
roof will stay in correct place
Position all corner the velcro from rooftop and frame. Take
notice this must be correct done, not to high not to low.
Pull out the frame as far as possible. You can put some pressure.
The safety lock can be in a reach of 5cm from the hole.
Push all corners into the saftey lock, you will here a click.You can
use some force.Please take care all corners needs to be attached
on a good way.
Lift each leg and slide lower leg extension out until the latching
button snaps into the first adjustment
Attach the roof on the frame(inside) with the clams. You can adjust
the height like the height you want.
Use the tie down kit to secure the Easy up to the ground
With storm/heavy wind do not set up and Easy Up
Summary of Contents for Pro 40
Page 1: ......
