Grizzl-E DUO GCD-14-24-P User Manual & Installation Manual Download Page 18

18

6. Charging Status Indicators and Buzzers 

6.2 Grizzl-E Duo Alternating Indicator Light 

Grizzl-E Duo Features an Alternating LED Indicator Light to give the status of both 

chargers. The primary and secondary charger will display their status in the following 

sequence: 

Primary Charger

Secondary Charger

Transition

Solid Colour or  slow flashing indicates 

the status of the primary charger. 

LED Indicator 

Buzzer

Description 

Definition

No buzzer

No buzzer

No buzzer

No buzzer

No buzzer

No buzzer

Buzzer beeps

Not illuminated  

Red Steady

Blue Steady 

Blue Flashing  

Green Flashing 

Green Steady

Red Flashing  

Power Off   

Initialization

Ready 

Vehicle detected   

Charging in progress   

Charging complete or no 

current consumed by the car

Fault  (See Chapter 6.3 LED 

Fault Indicator on page 19)

White LED indicates transition of the 

status Indicator between Primary and 

Secondary Charger

Modulating or rapid flashing indicates 

the status of the second charger. 

6.1 Indicator Lights

No buzzer

White

Transition (See «6.2 Grizzl-E 

Duo Alternating Indicator 

Light» on page 18)

Color: Blue/ 

Green/Red

Color: White

Color: Blue/ 

Green/Red

Summary of Contents for DUO GCD-14-24-P























Reviews: