10.4 Projector display panel functions
Kolorglobe MK2 7000
is fitted with a series of display-accessible menu to adjust or monitor operating parameters.
See the menu list in the following table.
To access the menu push the key “MENU” until the display reads “OPT”.
By pushing the keys “UP” or “DOWN”, it is possible to scroll the menu list.
Push the key “ENTER” to activate the selected menu or the key “MENU” to return to the main menu.
10.4.1 OPTION menu
10.4.2 CALIBRATION menu
10.4.3 AUTO menu
Display Description
Function
Option menu
Setting of the operating parameters
Calibration menu
Calibration of the X, Y and zoom position
Automatic mode
Enables the automatic operating mode
Information menu
Read the operating information
Test menu
Active the test functions
Display Description
Function
Default
PAN inversion
Reverse the PAN movement direction
OFF
TILT inversion
Reverse the TILT movement direction
OFF
PAN/TILT inversion
PAN channel is inverted with TILT channel function
OFF
Disable encoders
Disable the PAN / TILT encoder
OFF
Lamp controll
Enable the lamp control via DMX
OFF
Default setting
Set the factory setting for all the functions
Reverse display
Reverse the display reading (base or suspended)
OFF
Display Description
Function
Default
Zoom calibration
Set the zoom
0
X pos. calibration
Calibration of the lamp alignment on the X axis
0
Y pos. calibration
Calibration of the lamp alignment on the Y axis
0
Display Description
Function
Default
Automatic mode
Enables the automatic operating mode
OFF
44
English
