14
4.1 Options:
1= Master On/Off:
Master On -AUTOMATIC MODE
Master Off -DMX MODE
2= Preset Colours:
Yellow, Cyan, Magenta, all in one channel.
3= Remote switch lamp On/Off:
Lamp On/Off through the DMX controller.
4= Dimmer shutter, lamp On/Off Independent setting:
To enter this option push SELECT after you have set option 4 to ON(the display shows
the current projector addressing); to view the dimmer/Shutter adressing push SELECT
and then push (+) and (-) to view the new one and push ENTER to memorise it.
Note: The unit will have now two different addressing. Within 15 seconds the pro-
jectors returns to the operating mode and the display shows the colours addressing
which is automatically updated to the new addressing.
9= Test
Lamp life: Push ENTER for more then 5 seconds
Use meter: Push ENTER for more then 20 seconds
To reset the lamp life meter push (-), (+) and ENTER simultaneously until you get the
zero setting of the display.
5.0 USE OF THE LANTERN
5.1 DMX function
To access the unit through a DMX controller
KOLORADO® MK4 2500
must be set to
MASTER OFF. Push SELECT; when
1.ON
is displayed push (+) or (-) to obtain
1.OF
. Now
press ENTER. The unit is set to
MASTER OFF
.
Note: when the KOLORADO® MK4 2500 unit leaves the factory it is set to MASTER ON
and works in AUTOMATIC MODE (See AUTOMATIC MODE section).
Every single
KOLORADO® MK4 2500
unit must have its own display correctly set.
Please set the display of each unit as per diagram 1 when more units are accessed
through a DMX controller.
KOLORADO® MK4 2500
uses 2 or 5 channels according to the chosen options.
www.carlosmendoza.com.mx
