Griven GR0466, Instruction Manual

Page: 22 / 24

All components of the unit are available as spare parts at Griven dealers.
Exploded views, wiring diagrams, electronic layouts and advertising brochures are available on request.
To make the job of assistance centres easier, specify serial number and model of the unit which spare parts are
requested for.
The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old
lighting fixtures must not be disposed of the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimise the recovery and recycling of the materials they contain and reduce
the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance it the must be separately collected.
Consumer should contact their local authority or retailer for information concerning the correct
disposal of their old appliance.
12.0 Spare parts
13.0 Disposal
14.0 Troubleshooting
Inconvenience Possibile Cause Action
The fixture is com-
pletely dead
No power to fixture.
Check that power is switched on and cables are
plugged in.
The unit does not
respond properly
to the DMX control.
Incorrect DMX cable
connection.
Check connections and wires. Rectify inefficient
connections. Repair or replace damaged wires.
Unfinished data
connection.
Insert a terminal plug in the output jack of the last unit of
the connection.
Incorrect address
assignment to the units.
Check the addresses of the units and the protocol
settings.
One of the unit is faulty
and it is affecting the
data transmission along
the connection.
Short-circuit units singularly, one by one, since regular
working is restored.
No light output
Lamp blown Disconnect fixture and replace lamp.
Lamp not installed Disconnect fixture and install lamp.
Lamp cuts out
intermittently.
Fixture is too hot.
Let the fixture cool down.
Ensure that the ambient temperature is below 40 °C.
22 English