Griven ATHOMO IP67 COLD WHITE NARROW, Instruction Manual

Page: 17 / 24

4.2 Powering up the unit (RGB)
The unit can operate with constant current standard RGB 350mA led driver.
Athomo is fitted with heat shrink tube which allow to perform IP67 connections.
To make the connection follow these instructions.
A. Open the bag enclosed yo this manual.
You will find inside two pieces of heat shrink tube.
B. Insert the tube “1” onto the cable “2” .
Polarity and colours correspondence of the
connection cables must be strictly respected.
WHITE
BROWN
GREEN
BLUE
PINK
YELLOW
GRAY
N.C.
RED+
GREEN+
BLUE+
RED-
GREEN-
BLUE-
1
2
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• Wiring and connection actions are to be performed by a qualified staff.
English 17