26
English
POWERSHINE S ULTRA SPOT
is fitted with butt connectors and heat shrink tube which allow to perform
IP67
con-
nections. To make the connection follow these instructions.
A.
Open the bag with label “POWER SUPPLY”.
You will find inside a piece of heat shrink tube and 4 butt connectors.
B.
Insert the tube
“7”
onto the power supply cable
“8”
on the
side of the rear box of the unit.
C.
Make the connection to the network by using the butt
connectors
“9”
, pressing them with a proper tool
“10”
.
D.
Warm up the tube by using a heater for heat shrink tubes
“11”
till the complete shrinkage.
The connection so obtained features an
IP67
protection rate.
11
9
10
7
8
