•
Dimmer
Press the keys UP or DOWN to lead the cursor to FUNCT. Press ENTER to access the
functions and select DIMMER. Press ENTER to confirm.
If you have selected
AUTOMATIC
or
COLOR
, it is possible to modify the map of the
DMX channels by selecting the type of unit which you want to control (in case you
want to control more units, they will all have to be of the same type).
Press the keys ESC+ENTER and after a few seconds the writing
MODE will appear.
Press the keys UP or DOWN to change the mode and press
ENTER to confirm.
The three different modes correspond to the following groups of units:
•
Mode 001
LED RGB units with 4 DMX channels (Dawn, Dune, Parade, Deck, etc).
•
Mode 002
CYM units with 3 DMX channels (Trident CYM 150, Vesuvio OS CYM 250, etc).
•
Mode 003
CYM units with 5 or 6 DMX channels (Graphite, Stelvio CYM 300, Everest CYM 900,
Kolorado, etc).
3.3 AUTOMATIC mode
It is possible to select one of the 8 preset programs, whose effect is described in the
following table.
The user can set the length of the color scenes (Pause) and of the color changing
speed (Fade) by adjusting the values visualized on display.
The display reads that: automatic program no.1 is being
executed, pause time is 3 seconds and fade time is 3
seconds.
The last line in the display reads date and time.
Funct.
AUTOM.1
Pause Time
3s
Fade Time
3s
14/04
15:23:21
Program N° Effect
1
Red - Magenta - Yellow
2
Red - Magenta - Yellow - White
3
Green, Cyan, Yellow
4
Green, Cyan, White
5
Blue, Cyan, Magenta
6
Blue, Cyan, M White
7
All colors
8
All White
Mode
003
14
