4.5 Master/Slave mode
It is possible to set the units in slave mode to allow them to follow the master unit. Set the rele-
vant dip-switch (no. 12) to ON for master unit, while all the slave units must have all the dip-swit-
ches se to OFF.
The DMX specifications require an optima terminal resistor (100-120 ohm). The terminal resistor
must be placed between the DATA+ and DATA- wires present on the last unit of the line.
13
10
Use 2-pole shiel-
ded cable + hose
(GND)
The hose (GND)
must not touch
metal parts
Junction box for
the DMX cable
connection
Line
terminal
Calza
Hose
Data + Data - GND
Min.Sect.
0.35 mm
