1. Packing List
Name
Quantity Remarks
A1-W Access Control
1
User manual
1
Screw driver
1
φ
20mmx60mm,Special for keypad
Rubber plug
2
φ
6mmx30 mm, used for fixing
Self tapping screws
2
φ
4mmx28 mm, used for fixing
Star screws
1
φ
3mmx6mm, used for fixing
Please ensure that all the above contents are correct. If any are missing please
notify the supplier of the unit.
2. Quick Reference Programming Guide
To enter the programming mode
999999 is the default factory master code
To exit from the programming mode
Note that to undertake the following programming the master user must be logged in
To change the master code
To add a PIN user.
To add a card user
1 : User ID number : # : PIN : #
T
he ID number is any number between
1 & 2000.
T
he
PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved.
Users can
be
added
continuously
without exiting programming mode
.
1 : Read Card : #
Cards can
be added
continuously
without
exiting
programming mode
.
To delete a PIN or a card user.
2 : User ID Number : #
for a PIN user
or
2 : Read Card : #
f
or a card user
Users
can
be deleted continuously
without
exiting
programming mode
.
To unlock the door for a PIN user
Enter the PIN
then press
#
To unlock the door for a card user
Present the card
TEL. +30 2105063188
www.grital.eu
e-mail: [email protected]
Address : Riga Fereu 40, ILION, postal code 13121, Athens, Greece
*
:
Master Code
:
#
0
:
New Code
:
#
:
New Code
:
#
The master code can be 6 to 8 digits
*
GRITAL ACCESS CONTROL
