4
h)
Warning:
Never use with flammable products!
i) When using cleaning fluids which need to be diluted, always strictly observe the
manufacturer's instructions to make sure the mixture is correct.
j) Never point the AIR PULSE Cleaning Gun towards the face or body of you or
anyone else.
k) Keep the AIR PULSE Cleaning Gun out of reach of children.
l) To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and understand
these instructions before performing any such task.
m) This tool and its accessories must not be modified.
n) Always shut off air supply, release air pressure and disconnect tool from air
supply when not in use, before changing accessories, or when making repairs.
o) Whipping hoses can cause serious injury. Always check for damaged or loose
hoses and fittings.
PRIOR TO TOOL OPERATION
The tool is intended to be operated as a hand held tool. It is always recommended
that while using the tool, operators stand on a solid floor, in a secure position with a
firm grip and footing.
Caution:
Use a clean air supply that will deliver a measured air pressure that
will not exceed 115 psi when the tool is running with lever fully depressed. It
is recommended to use an approved 3/8” (10mm) hose with a 50' (15.24m)
maximum length.
OPERATION
Liquid mode:
Turn the lever into the vertical position to activate the (cleaning) liquid
in the bottle.
Air mode:
Turn the lever into the horizontal "air only" position, press the trigger and
dry the surface you have cleaned, following with a wipe of a clean/dry
microfiber.
Important:
Hold the cleaning spout at a distance of only 1 inch from the surface
you are cleaning and a 45 degree angle.
Note: always test cleaning product in an inconspicuous area to ensure compatibility.
Liquid Mode
Air Mode
