Grindlux 4000, Operator'S Manual

Page: 2 / 16

2
– English
Introduction
This operator’s manual describes in detail how
the bandsaw blade grinder is used and main-
tained and how servicing is to be carried out. It
also describes the measures to be taken for
maximum safety and how the safety features are
designed and function, as well as how they are
inspected, maintained, and repaired if necessary.
NOTE! The section dealing with safety must
be read and understood by all those who
install, use, or repair the sawmill.
The operator’s manual comprises installation,
usage, and the different maintenance procedures
that can be performed by the operator. More
comprehensive servicing or troubleshooting
should be performed by the dealer’s service
personnel.
The operator’s manual describes all the requisite
safety features and should be read and under-
stood by the user before the sawmill is assem-
bled.
Symbols and warning signs shown on this page
can be found in this operator’s manual and on
the one-man sawmill. If a decal on the sawmill
has been damaged or is worn, a new warning
decal must be applied as soon as possible in
order to ensure the greatest possible safety
when using the sawmill.
The bandsaw blade grinder shall only be used
for bandsaw blades with hardened saw teeth.
The pitch shall be 25 mm and the bandsaw blade
width shall be 32 mm.
INTRODUCTION
Read this manual carefully and
make sure you understand it
before attempting to use the
bandsaw blade grinder.
Exercise caution.
KEY TO SYMBOLS
Symbols
The symbols below are used in this operator’s
manual.
Warning Signs
The decal with the symbols below is found on the
bandsaw blade grinder.
Eye protection should be
used.
Protective gloves should be
worn.
Polarity reversal of the
bandsaw blade grinder when
connected to a 12-volt
battery.