manualshive.com logo in svg

Grindex Macro, Installation, Care And Maintenance

Share
Download
Grindex Macro Installation, Care And Maintenance Download Page 2

Installation, care and maintenance 

Micro, Macro, Solid

2

Product description  __________________3

Applications ______________________________ 3
Motor data ________________________________ 3
Technical data _____________________________ 3
Dimensions _______________________________ 3

Performance curves   _________________4

Installation  __________________________5

Electrical connections  ________________6 

Earth continuity test ________________________ 6
Level regulators  ___________________________ 6
Wiring diagram   ___________________________ 7

Contents

Operation  ___________________________8

Care and maintenance  ________________9

Inspection ________________________________ 9
Tightening & lubricating screws ______________ 9

Spare parts kits _____________________10

Main parts  _________________________ 11

Data plate interpretation

NOTE!
The manual is to be read before installing or 

operating the pump.

Grindex pumps are high quality products with expected 

reliable operation and long life.
However, should the need arise for a warranty claim, 

please contact your Grindex representative.

Warranty claim

Product no

Frequency

Rated voltage

Rated current

Maximum power consumption

Serial number

Q

max

H

max

Weight

Pump model

Made in Sweden

IEC 335-2-41 Class F

IP 68

5 m

Grindex AB Sweden

www.grindex.com

Summary of Contents for Macro













Reviews:

No comments

Brands by name

Popular brands

Load more brands