www.ebikes.ca/satiator
+1(604) 569-0902
- 8 -
2.1.
Editing the Profile List
The profile list shows all preset and custom charge profiles that have been loaded into memory.
The circle on the left is a radio button indicating if the profile is active or not.
2.1.1.
Activating New Profiles
If you scroll through the list and see another profile that you want, press and hold the lower
button to edit it. Then press and hold the button again when
Active? - NO
is selected, and this
will change to
YES
. After exiting the edit menu by selecting
Done
, you will return to the profile
selection screen and will see that the active radio button is now checked.
Figure 11:
The active status of a profile is seen via the radio button
You can activate as many or as few profiles as you like. If you want a profile that isn't one of the
presets, then you can create up to 20 custom profiles as described in
Section
2.1.3.
2.1.2.
Setting a Default Profile
In addition to activating or hiding profiles, you also have the ability to set one profile as your
default. This state is indicated by the bold letter
D
under the active button.
A default profile will be pre-selected when the Satiator is
turned on and will start charging when a battery is connected
even with no button interaction.
Figure 12:
Making a profile Default
Figure 13:
Letter "D" indicates default
status
