46
ELE
Model (2
nd
series) - Automatic monitoring of the level of the water in the water heater.
Electronic model with microprocessor managed control panel with pushbottons that operate independently from one another. It enables varying amounts
of coffee to be dispensed using different dosing patterns. The pushbottons are identified by warning leds. The electric circuit complies with safety and
operating emergency regulations and approved switch for each dispensing unit has been fitted to the front of the machine at the top.
The level of the water in the water heater is monitored automatically.
Available in the 2, 3 and 4 unit versions.
A
- Cup heater switch (optional)
B
- Steam knob
C
- Hot water knob
D
- Water heater pressure gauge
E
- Main switch
F
- Emergency Start/Stop dispensing switch
L
- Boiler water level indicator
N
- Coffee dispensing pressure gauge
P
- Manually operated knob for supplying water
M1
- Coffee dispenser button for a small
cup of coffee
M2
- for a big cup of coffee
M3
- for two small cups of coffee
M4
- for two big cups of coffee
M5
- Delivery Programming/Stop
Put the required amount of coffee into the filter holder and fit it under the unit. Next, press the key corresponding to the desired delivery on the relative
keyboard. The LED turning on indicates the delivery mode selected.
Now press the F key to start delivery. Delivery stops when the F key is pressed again.
If the wrong selection is made, press the key
F
again to stop supply.
A
C
L
N
D
E
MAX
MIN
M1 M2 M3 M4 M5
B
M1 M2 M3 M4 M5
B
P
F
F
