23
1
2
Short/Long door
The firebox door can be mounted in such ways that it
will open either to the right, or to the left. To do so,
you need to pull out the metal pin, which attaches the
door, and carefully remove the metal spacer installed
under the door.
Further:
1) Choose the door opening direction and mount the
door onto the seat. The spacer shall be installed on the
hole under the door.
2) Fix the door in this position via the metal pin.
sealant shall notcrumble and crack. Surface treatment, application, subsequent cleaning
of surfaces should be carried out in accordance with the sealant application instruction.
Procedure:
5.1) Apply the sealant from the rim side of the telescopic side along the whole length.
5.2) Fill the gap between the telescopic and fixed parts with the sealant while compacting
the sealant with an elastic applicator (for example, a rubber one) of a necessary size.
Note: in case the surface of the flue was not properly cleaned of leftover sealant after ap
-
plication, then it can peel off after hardening and further heating of the furnace. Clean with
a plastic brush and waste cloth. Clean after complete cooldown of the heater
.
Sealant
Telescopic part
Fixed part
