Grill'D Step-Grill, Installation And Operation Manual

Page: 13 / 16

13
4. COMMISSIONING
IMPORTANT! Remove all packing elements, paper information labels, etc.,
prior to the operation of the product.
IMPORTANT! It is prohibited to operate products with faults.
Make sure that all elements of the grill are free from defects, and also make
sure that the delivery package is complete.
Prior to operation of the product, it is necessary to carry out a preparatory
stoking outdoors or in a ventilated room away from combustible surfaces and
materials, in compliance with fire safety measures and safe work practices.
Compound for metal protection and volatile components of the heat-resistant
enamel evaporate as a result of stoking.
IMPORTANT! It is necessary to void the chance of mechanical impact and
ingress of water on the paint coating of the heater during preparatory
stoking.
After carrying out preparatory stoking, wait for the complete cooldown of the
grill surface. Wipe the cooking range (5) using hot water and a non-metallic
washing brush, and then wipe it dry. Only use cleaning agent in case of severe
contamination.
Follow the same cleaning procedure in the process of further operation.
5. WARRANTY
The warranty period for the Product is 1 year from the date of purchase of
the Product by the Consumer. If the Consumer detects a non-compliance
of the Product with the specified properties, the Consumer has the right
to address a claim to the Company that sold the Product. However, the
Company has the right to contact the Manufacturer to resolve issues
regarding the Claim.
The Manufacturer undertakes to improve the entire Product or its parts (as
decided by the Manufacturer) free of charge, replace the entire Product, its
components, parts, compensate for the damage in any other way (as agreed
with the Consumer), if the defect occurred during the warranty period or due
to the Manufacturer’s fault.
Should the Consumer make alterations to the entire Product, its
component(s), parts, then warranty obligations do not apply to the Product.
Thereafter, the warranty does not apply to elements that are subject to
periodic replacement during operation.
The Product warranty is not provided in case of violation by the Consumer of
the requirements specified in the Operation Manual, technical requirements
for installation and operation of the Product. The above violations by the
Consumer release the Manufacturer from responsibility.
Signs of corrosion may appear on the Product due to damage to the paint
coating during operation, which is not a warranty case.