20
GRILLCHEF
Troubleshooting
If there is a fault despite due care, this chapter may help you to resolve the malfunction.
Malfunction
Cause
Remedy
There is a smell of gas
Leak in the gas system
1. Close the cylinder valve immediately
(turn G1 clockwise)
2. Prevent any flames or sparks (do not
switch on electric devices)
3. Tighten all connections of the gas sys-
tem
4. Check all components of the gas system
for external damage; replace defective
parts with original spare parts
5. Check for leaks using a leak detector
Burner does not light
Gas cylinder is empty
Replace the gas cylinder
Cylinder valve is closed
Turn the cylinder valve (G1) anti-clockwise
Distance between the spark plug
and gas outlets on the burner (2) is
incorrect
Visual inspection; correct if necessary
The temperature of the heater is
too low
Pre-heating time too short
Set flame regulator to max.
Gas outlets on the burner are
blocked
Remove blockage from burner
Popping or bubbling noise
Flashback caused by blockages in
the burner.
1. Close the cylinder valve immediately
(turn G1 clockwise)
2. Wait for three minutes and start up the
heater again.
3. If the problem recurs, remove burner
and clean
Environmental information and disposal measures
To dispose of the heater, disassemble it. Recycle the metal and plastic components.
