SWINGLOX
Note
:
• The code must contain 6 digits.
• Do not use any personal or similarly known data, such as birthdays, for your code.
• Simple codes that are easy to guess, may not be used.
Avoid to record the selected code or save to disk. Should that for various reasons can not
be avoid, so the recorded code is to be kept safe and to be protected against
unauthorized access by third parties.
• New codes will be rejected if
- the new code deviates from an existing code by only one digit
- the new code is identical to the code of a deactivated user (see special function 3)
• If the new code is rejected, the programme will exit the function immediately.
• For security reasons, you should only change the code when the safe door is open.
Please check that the new code is working properly before closing the door.
Start special function 0
0
constantly
Enter old code
1 2 3 4 5 6
(example)
constantly
Enter new code
6 5 4 3 2 1
(example)
constantly
Re-enter new code
6 5 4 3 2 1
(example)
constantly
Special Function 1: Create User
The only active user by factory settings is the user with the master code. Further users will have
to be created before they can operate the lock.
It is recommended that the Master inform users that, even after entering valid user codes, he can
open the safe with his Master Code
at any time.
Note:
• Can only be executed with the master code.
• The new code must contain 6 digits.
• Do not use any personal or similarly known data, such as birthdays, for your code.
• Simple codes that are easy to guess, may not be used.
Avoid to record the selected code or save to disk. Should that for various reasons cannot be
avoid, so the recorded code is to be kept safe and to be protected against unauthorized access by
third parties.
• New codes will be rejected if
- the new code deviates from an existing code by only one digit
- the new code is identical to the code of a deactivated user (see special function 3)
• If the new code is rejected, the programme will exit the function immediately.
• For security reasons, you should only change the code when the safe’s door is open.
Please check that the new code is functioning properly before closing the door.
• User number 9 for bypassing opening delay (quick open code) can only be created if
- Opening delay is switched off (see special function 9)
- Opening delay is turned on, the opening delay time has passed and the time frame for
opening is active (see special function 9)
Special Function 2: Turning Users on/off (Flash 5)
All users are turned on or off.
Note:
•
Can only be executed with the master code.
•
The lock can only be opened with the master code when users are turned off.
Start special function 2
2
constantly
Enter the master code
1 2 3 4 5 6 (example)
constantly
** Maximum number of users subject to flash version
Special Function 3: Delete User
This function has to be executed for each user separately.
Note:
• Can only be executed with the master code.
Start special function
3
3
constantly
Enter master code
1 2 3 4 5 6 (example)
constantly
** Select user
number with
following
differentiations:
3
(example)
- User deleted
off
- User cannot be
selected
Cancel
off
Summary of Contents for SWINGLOX
Page 1: ...SWINGLOX TM Griffon SWINGLOX SWINGLOX SWINGLOX SWINGLOX 1 8 0 1 2 3 6 7 8 9 9 2...
Page 3: ...SWINGLOX 1 6 3 9 9 9 1 1 1 2 3 4 5 6 3 6 5 4 3 2 1 6 5 4 3 2 1 2 2 2 1 2 3 4 5 6 3 3 3...
Page 6: ...SWINGLOX 2 1 9 1 2 9 6 5 4 3 2 1 2 9 3 2 1 6 5 4 3 9 2 9 1 2...
Page 13: ...SWINGLOX 2 1 2 9 1 2 3 4 5 6 0 5 1 2 3 4 5 6 3 4 5 10 5 4 2 5 10 0 6 3 0 0...
