Griffin Technology iTrip, Manual

Page: 5 / 8

1
2
TURNING THE LED ‘OFF’ OR ‘ON’
To turn the status LED on the front of the iTrip OFF,
navigate to the bottom of the
iTrip Stations playlist and
select “ LED off ”. Then follow these two simple steps.
Click the
PLAY/PAUSE ( )
button on your iPod.
When the LED begins to rapidly blink, click the PLAY/PAUSE ( ) button
again. The LED will pulse three times slowly to confirm.
The LED will remain off until you change frequencies. It will turn on to give you
visual feedback during the procedure, and then turn off again.
To turn the status LED on, select “ LED on ” at the bottom of the iTrip Stations
playlist, and follow the two steps listed above.
TURNING THE iTRIP OFF
The iTrip never needs to be turned off. It turns off automatically if no music is
present for 60 seconds. It turns back on when any music comes from the iPod.
CHARGING YOUR iPOD WHILE USING THE iTRIP (Original iPod)
To charge your iPod while your iTrip is in use, simply lift and rotate the iTrip a
quarter turn counter-clockwise. Re-connect the iTrip perpendicular to the iPod by
pushing down until the LED comes on. This exposes the FireWire port for charging.