Some audio content, such as audio books, will sound much the same in either stereo
or mono. Since mono mode produces a stronger signal, you may choose to listen in mono,
especially in populated areas where there are a lot of active stations crowding the dial.
Troubleshooting
Problems? No problem. Here’s what to do:
1. Check your iPod. Is the battery charged? iTrip draws its power from your iPod battery.
When you plug iTrip Pocket into your iPod, do you then see the Griffin tuning screen
on your iPod? Is your iPod paused?
2. Check your FM radio. Power on? Radio tuned to an open, unused frequency? Is the
radio’s volume correctly adjusted? If iTrip experiences an extended period of silence or
quiet portion of a song, it could go into a low power mode to extend iPod battery life.
To wake it back up, restart music on your iPod, or disconnect and re-connect your iTrip.
3. Check your iTrip. Is iTrip fully connected with your iPod? Have you selected the
same frequency on your iPod that is currently tuned on your radio?
Technical Specifications
• Designed and built for 2nd generation iPod nano, but will work with all iPod models
4th generation or later that use the full-size Dock Connector to sync and charge.
• Power: No batteries required. Draws minimal power from the iPod battery when in use.
• Output RF range
(
Region set at Factory
)
: US: 88.1 MHz ~ 107.9 MHz
EU: 88.0 MHz ~ 108.0 MHz
Japan: 76.0 MHz ~ 90.0 MHz
• Radio Frequency Adjustment:
US, EU: 0.2 MHz per step
Japan: 0.1 MHz per step
• Radio Frequency Response: 50 Hz ~ 15 KHz
© 2007 Griffin Technology • www.griffintechnology.com • iTrip is a registered trademark
of Griffin Technology, Inc.• iPod is a trademark of Apple, Inc., registered in the U.S. and
other countries. • Patents Pending • Made in China • Designed in Tennessee
1 YEAR
WARRANTY
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Griffin Technology
4042-NTRPDA
We stand behind every product, with the industry’s best customer service,
backed by a simple, fair warranty. Using this product signifies your acceptance
of the terms of the warranty, so please read our warranty details at
www.griffintechnology.com/support/ before using your Griffin product.
The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate the equipment.
