Step 3
–
The storage compartment beneath the
seat is for light weight storage only, putting heavy
items or items that will prevent closing the seat
and sitting on the bench may cause for the
bottom storage to break or may cause the bench
to be unstable. (
Figure 4
)
Step 1
–
Flip bench seat upside down, take the
legs and wiggle the bolts coming out of the legs.
If they are loose, use a Philips head screwdriver
to tighten the screw head found at the top of
the leg (See
Figure 1
). Place the screw bolt that
is already in the leg in the hole on the side of
the bench. Place the washer, lock washer and
nut and tighten using a wrench (see
Figure 2
).
Step 2
–
Flip the bench to make the legs stand
on the floor, make sure that the top screw
heads are screwed in tightly and the nuts of the
legs are tight inside. The height adjustment
knob when turned right will increase the height
of the bench and turning left will lower it as
shown in
Figure 3
. If there is difficulty in raising
or lowering the bench height use both knobs.
Step 4
–
For safety reasons, please always make
sure to test the stability and safety of the product
before use. Double check all nuts and bolts, knobs
and connectors, make sure that these are tight
and securely fastened before use of your product.
Test the product under light use or light loads the
first time to confirm assembly and structure of the
product is correct.
Please scan the QR Code below for the product
demonstration video. Or go to the URl shown here and find
the product video. www.Griffin-Stands.com/Videos
