Step 3
–
The storage compartment beneath the
seat is for light weight storage only, putting heavy
items or items that will prevent closing the seat
and sitting on the bench may cause for the
bottom storage to break or may cause the bench
to be unstable. (See
Figure 4
)
Step 1
- Take the piano bench legs and take off
the rubber protection sleeves on the tip of the
screw bolts, once the rubber protection sleeves
are removed, wiggle the bolts coming out of the
legs. If they are loose, use a Philips head
screwdriver to tighten the screw head found at
the top of the leg (See
Figure 1
). Place the screw
of the legs to the bracket and make sure that it
is the correct side, as shown in
Figure 2
.
Step 2
–
Place the washer then the nut and use
a wrench to tighten in place (see
Figure 3
). Also
check the top screw of the legs, make sure it is
screwed down to avoid the bench from being
wobbly as said in Step 1.
Step 4
–
For safety reasons, please always make
sure to test the stability and safety of the product
before use. Double check all nuts and bolts, knobs
and connectors, make sure that these are tight
and securely fastened before use of your product.
Test the product under light use or light loads the
first time to confirm assembly and structure of the
product is correct.
Please scan the QR Code below for the product
demonstration video. Or go to the URl shown here and find
the product video. www.Griffin-Stands.com/Videos
