background image

BATTERY BACKUP (BBU) DIAGNOSTICS

Battery Backup Unit (BBU) Diagnostics

GREEN LED:

All systems are normal.

•   A solid LED light indicates the 

batteries are fully charged.

•   A flashing LED indicates the 

batteries are being charged.

NOTE: Batteries do not have to 
be fully charged to operate the 
motor unit.

YELLOW LED:

The motor unit has lost power and is operating off of the BBU.

•   A solid LED with beep, sounding approximately every 2 seconds, indicates the motor 

unit is activating the door and is operating off of the BBU.

•   A flashing LED with beep, sounding every 30 seconds, indicates batteries are low.
•   Once the power is restored the BBU will recharge. This is indicated by a flashing 

green LED.

RED LED:

An error has been detected and the BBU will automatically shut off. The BBU will attempt 
to restart by reconnecting to the batteries. If the error is still present it will shut itself off 
again.
This process will repeat every 5 minutes or until the error has been resolved. This is used 
to prevent further draining of the batteries.

•   If a red LED remains on when the power is restored, and is accompanied by a beep 

sounding every 30 seconds, please call for service.

Red LED

Green LED

Yellow LED

114A5188A

Chamberlain Australia Pty Ltd 
PO Box 1446 
Lane Cove NSW 1595
Ph: 1800 638 234

Chamberlain New Zealand Ltd 
PO Box 100-221 
AUCKLAND 0745
Ph: 0800 653 667

Summary of Contents for GLD-BBU24V

Page 1: ...able distance around 80cm Install the BBU securely onto the support beam and connect the cable to the motor unit Replace the plastic BBU cover ensure to cable is positioned in the cut out provided Plug the opener into AC power and turn the AC power on for the BBU to be activated Check the BBU LEDs activate for 3 seconds and then the green LED commences flashing indicating the BBU is charging NOTE ...

Page 2: ...otor assembly ensure you engage the plastic lugs on the lower half of the housing Tighten the retaining screw provided into the centre housing to secure the BBU Connect the BBU cable into the terminal assembly on the Motor Replace the plastic BBU cover Plug the LR Drive into AC power and turn the AC power on for the BBU to be activated Check the BBU LEDs activate for 3 seconds and then the green L...

Page 3: ...2 Charge the battery Allow the batteries 24 to 48 hours to fully charge before using the BBU system A fully charged BBU supplies 24V DC to the motor unit for one to two days of normal operation during an electrical power outage If the battery voltage drops too low the batteries will disconnect and the motor unit will no longer operate under battery power After the electrical power has been restore...

Page 4: ...s batteries are low Once the power is restored the BBU will recharge This is indicated by a flashing green LED RED LED An error has been detected and the BBU will automatically shut off The BBU will attempt to restart by reconnecting to the batteries If the error is still present it will shut itself off again This process will repeat every 5 minutes or until the error has been resolved This is use...

Reviews: