BASIC OPERATION - F4
REV E
–03/01/2017 13:38:00
Page 3 of 6
W:\Electrical\INSTRUCT\INSTRUMENT\WATLOW\F4\OBS\BASIC OPERATION - F4 REV E.doc
F.
ADVANCING PROFILE
***NOT REQUIRED FOR NORMAL OPERATION
1.
While a profile is running, press .
2.
Press
until cursor is next to
Terminate
on lower display.
3.
Press
to terminate profile. Profile Indicator Light will be off.
4.
Press
.
5.
Press
to start a profile.
6.
Press
until cursor is next to desired profile on lower display.
7.
Press
to select profile.
8.
Press
until cursor is next to desired step on lower display.
9.
Press
to begin profile. Profile Indicator Light will be on.
G.
HOW TO PASSWORD PROTECT
***NOT REQUIRED FOR NORMAL OPERATION
1.
Once controller is powered on, press until
Go to Factory
is displayed.
Press to select
Go to Factory
.
2.
Press or until cursor is next to
Set Lockout
. Press to select
Set Lockout
.
3.
Press or until cursor is next to desired menu to lockout (ex.
Profile). Press to select menu.
4.
Press or until cursor is next to
Password
. Press to confirm.
5.
If no password is set, you will be asked to enter one. Press or to
modify each digit of the password. Press to confirm each digit. Once
entered, press to accept.
6.
Once completed, press twice to return to
Main Page
.
