5
< 9,0 m/s
9,0 m/s
10,7 m/s
12,8 m/s
16,7 m/s
21,0 m/s
25,6 m/s
29,2 m/s
33,3 m/s
< 32,5 km/h
32,5 km/h
38,5 km/h
46 km/h
60 km/h
76 km/h
92 km/h
105 km/h
120 km/h
Griesser | Operating Instructions | Solomatic
®
II
Setting values for sensors according to SIA 342
Sensors fitted next to product.
Class 0
Class 1
Class 2
Class 3
Class 4
Class 5
Class 6
Class [7]
Class [8]
[ ] No wind resistance class in accordance with DIN EN 13659 and SIA 342.
Wind classes of Griesser external venetian blinds
Product
Permissible wind resistance class limit values
1
Width (mm)
1500
2000
2500
3000
3500
4000
4500
Solomatic
®
II with guide rail
6
6
5
5
4
4
2
Solomatic
®
II with guide cable
2
6
4
4
4
(3)
(3)
(3)
Solomatic
®
II System
6
6
5
5
4
4
2
1
Tests in accordance with product standard EN 13659. Product limit dimensions in accordance with data sheet.
2
from 3000 with additional cable
( ) Tests not possible in accordance with product standard. Values from own tests / practical experience.
The values in the table apply with the following reservations:
• Product dimensions and use comply with the Griesser technical data sheet.
• Installation, fastening and operation are carried out in accordance with installation and operating instructions.
• The products should be installed in the soffit / directly on the facade, with the curtain < 100 mm away from the facade.
• If the distance from the facade is between 100 and 300 mm, the value in the table must be reduced by 1 class.
• If the distance from the facade is between 300 and 500 mm, the value in the table must be reduced by 2 classes.
Furthermore, the table cannot be applied.
Application note
The external venetian blinds cannot be protected with wind sensors against sudden gusts of wind. Make sure that the external vene-
tian blinds remain retracted if a storm is imminent. Updrafts or fallwinds at facades could lead to the destruction of the external vene-
tian blinds. Wind sensors cannot detect these as a rule.
