Bracket,
Chain Saw
5/16-18 x 3/4 Bolt
Double T-Nut
Lock Washer
GRIDIRON
GRIDIRON
GRIDIRON
GRIDIRON
TM
Custom Tool Storage
TM
Chain Saw Holder Bracket
Instruction Manual
Thank you for purchasing this Gridiron product
Installation
Note:
Use this CB-01 Chain Saw Holder Bracket to mount the Chain Saw Holder to Gridiron posts, any vertical wall,
round trailer rail, or other vertical framework.
Shipping:
Fasteners are assembled at the factory but can loosen during shipping. Assemble any loose bolts, wash-
ers, and T-nuts only as shown (NOTE- INCORRECT ASSEMBLY WILL RESULT IN DAMAGE.)
Mounting Options
Option 1 Gridiron Post:
To mount on Gridiron posts, simply loosen the four bolts and slide the bracket to the posi-
tion desired. Tighten the four bolts.
Option 2 Vertical Frame:
To mount to a vertical frame, clamp the bracket in place and using the bracket as a guide,
drill holes through the frame. Assemble the bracket and screws then tighten in place.
Option 3 Enclosed Trailer Wall:
To mount directly to an enclosed trailer wall you must locate and fasten to the steel
trailer wall stud. Mount to the steel stud using four suitable sheet metal screws. No.12 or No.14 x 1 are recom-
mended. Warning, be careful not to puncture the exterior trailer skin with drills or screws.
Option 4 Round Trailer Rail:
To mount to a round trailer rail you will need two 5/16-18 Flat Head screws long
enough to reach through the trailer tube, chain saw holder bracket, and chain saw holder as shown on reverse.
Clamp the bracket in the desired location and, using the bracket as a guide, drill holes through the rail. Assemble the
chain saw holder, chain saw bracket with the legs facing the tube as shown, and screws then tighten in place.
Part List
Qty
Description
Part
No.
1
Bracket,Chain Saw102312
2
Double T-nut
102146
4
5/16-18 x 1” Bolt
4
5/16” Lock washer
Package Contents
