TX Data rate: 0=1, 1=2, 2=5.5, 3=11, 4=18, 5=24, 6=36, 7=54 Mbps (3)
f)
Power Management: The default setting allows the Wi232 to run at the fastest rate. Press the
Enter key to accept the default setting.
Enable power management (N) ? _
8.
Upon completing the IP and WLAN settings configuration, type
9
at the prompt and press
Enter
to save the setup
parameters and exit the Wi232 Serial Mode setup.
Parameters stored ...
9.
The Wi232 is ready for wireless connection.
2.2.2 Wireless Access Point (WAP) Connection
In the following example, a Wireless Access Point was assigned the network name of GRIDCONNECT.
Verify your wireless adapter is inserted correctly in the PC or laptop. Ensure the wireless adapter’s drivers
and utilities are installed.
Go to
Start/Settings/Network Connections
and verify your wireless adapter is enabled. Right click on the
connection and select
Properties
.
2-4
Wi232/WiUSB User Guide
