Configure
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
3.6.4 Connection Settings - TCP
To configure a channel’s TCP settings:
1. On the main menu, click
Connection
. The Connection Settings window for the channel displays.
2. In the available fields, enter or modify the following information:
Connect Protocol
Protocol
From the drop-down menu, select TCP.
Connect Mode: Active Connection
Active Connect
-
With Any Character
: Attempts to connect when any character is
received from the serial port.
-
Auto Start
: Automatically connects to the remote IP address and port
after booting up.
Endpoint Configuration
Local Port
Enter the local port number. The default setting is 10001. This works for
most applications.
Remote Port
Enter the remote port number. If you are connecting two NET232
devices in Tunnel Mode, enter the remote port of the other device here.
The other device can also use port 10001.
Remote Host
Enter the IP address of the remote device. If you are connecting two
NET232 devices in Tunnel Mode, enter the remote IP address of the
other device here.
3. When you are finished, click the
OK
button.
4. On the main menu, click
Apply Settings
.
3-10
NET232/NETUSB User Guide
Summary of Contents for NET232
