background image

Device Installer 

3. Device Installer  

3.1.1 Microsoft NET Framework 

Microsoft .NET is the Microsoft strategy for connecting systems, information, and devices through Web 
services so people can collaborate and communicate more effectively. .NET technology is integrated 
throughout Microsoft products, providing the capability to quickly build, deploy, manage, and use 
connected, security-enhanced solutions through the use of Web services. 

Web services are small, reusable applications that help computers from many different operating system 
platforms work together by exchanging messages. Web services are based on industry protocols that include 

XML

 

(Extensible Markup Language), 

SOAP

 

(Simple Object Access Protocol), and 

WSDL

 (Web Services 

Description Language). These protocols help computers work together across platforms and programming 
languages. 

From a business perspective, Web services are used to reenable information technology so that it can 
change, move, and adapt like other aspects of a business.  They not only connect systems, they can help 
connect people with the information they need, within the software applications they are used to using, and 
wherever they happen to be.  

Device Installer uses .NET Framework to adapt the NET485 for Web services. Your system must have 
.NET Framework installed for Device Installer to work properly. Installation options are included on the 
software CD. 

3.1.2 Install Device Installer  

1.

 

Insert the product CD into your CD-ROM drive. The CD will automatically start and display the main 
window.  

If the CD does not launch automatically:  

a) Click the Start button on the Task Bar and select Run.  

b) Enter your CD drive letter, colon, backslash, Launch.exe (e.g., D:\Launch.exe).  

 

Figure 7 - CD Browser Main Window 

NET485 User Guide 

3-1 

Summary of Contents for Device Server MSS 485











































































Reviews: