Do not use Smart Microinverter in a manner not specified by the
manufacturer. Doing so may cause death or injury to persons, or damage to
equipment.
Perform all electrical installations in accordance with all applicable local
electrical codes.
Be aware that only qualified personnel should disassemble and repair the
Smart Microinverters and non-qualified personnel should not install and/or
repair.
Do not attempt to repair the Smart Microinverter; it contains no
user-serviceable parts. If it fails, contact customer service to claim a return
merchandise authorization and start the replacement process. Tampering
with or opening the Smart Microinverter will void the warranty.
If the AC cable connector on the Microinverter is damaged or broken, do not
install the unit.
Before installing or using the Smart Microinverter, read all instructions and
cautionary markings in the technical description and on the Smart
Microinverter System and the PV equipment.
Connect the Smart Microinverter to the utility grid only after you have
completed all installation procedures and after receiving prior approval from
the local electrical utility company.
Be aware that the body of the Smart Microinverter is the heat sink. Under
normal operating conditions, the temperature is 15°C above ambient, but
under extreme conditions the Microinverter can reach a temperature of
75°C. To reduce risk of burns, use caution when working withMicroinverters.
Our suggestion is that do NOT disconnect the PV module from the Smart
Microinverter without first removing AC power when Smart Microinverter
still operation because it may cause of components damaged.
Keep away from children, no touching, no playing so as not to electric shock
when using.
Please installed in place of low humidity and well-ventilated so as to avoid
inverter overheating, as well as clear around the inflammable and explosive
materials.
Safety Instruction
3/13
