17
Radio Control
The Grid Pad devices also contain a radio transmitter that can be used to control a range of accessories. These include mains
sockets (and therefore lamps, fans and heaters) as well as alarms and intercoms. In most cases this will be Easywave radio
transmission. If your supplier uses Z-Wave please speak to them about pairing accessories. If you purchased the sockets with the
device then they will already be paired.
Programming a socket:
1.
Plug the socket into the mains.
2.
In Grid 2 create a new cell and insert the command ‘Easy Wave’.
3.
Press the programming button on the socket once.
The LED will start to flash in this pattern:
4.
Click ‘Test button’.
5.
The LED on the socket will now be solid for a few seconds before flashing again.
Press the programming button three more times to confirm the pairing.
6.
Exit ‘Edit mode’ in The Grid 2 and select your cell. It should turn the socket on.
7.
To create an ‘off’ cell repeat the process but choose ‘Button 1b’ and press the button on the socket twice when learning
for the first time.
Summary of Contents for Go 8
Page 1: ......