Fast Deposit Module CA10 User Manual
Confidential material of GRG, No disclosure to unauthorized Party 36 / 35
figure above) anticlockwise with a slotted screwdriver or a coin to adjust by a small space,
ensuring the machine is in the “count” mode after the adjustment, and test the note counting with
1,000 notes of 70% and 80% new 100 yuan to determine as above.Adjust repeatedly to applicable
state
Note: the “left and right width adjustment plates” have to be installed in the test process and the
width between the plates is adjusted to be available for 100 yuan.
The clearance is too tight: Adjust in the opposite direction of too loose above.
Or refer to the experience adjustment method as follows:
Insert notes into feeder roller to test the clearance while turning the scale; the standard is that notes
can not be fed as the rubber wheel groove is upwards; the notes can be fed as the rubber wheel is
downwards, and when pull out the notes, the wheel will rotate with notes ; or adjust it to the state
without overlapped, consecutive or inclined notes.Determine as mentioned above after the
adjustment.
Groove of rubber wheel
upward
Groove of rubber wheel
downward
