4. SBUS JOYSTICK MODULE OPERATION
DISABLE SBUS
ACTIVE
INACTIVE
CONTROL
SET SPEED
SET DIRECTION
Press 1 time
Press 1 time
Press 2 times
Press 3 times
Press & Hold 3s
If joystick is in inactive state, hold and press button 3 secs will change its state to active state.
Moreover, using button allows joystick to enter different modes :
- CONTROL:
Normal operation where user can control tilt and pan, LED status is
BLUE
- SET SPEED:
Press button 2 times to enter SET SPEED mode, LED status will change from
BLUE
to
GREEN
.
Speed of each axis is adjustable from 1 to 10 level, default is 5.
• Set TILT SPEED:
Move tilt stick to maxium travel T+ and back to center x times will increase tilt
speed by x level (x=1…10).
Move tilt stick to maxium travel T- and back to center x times will decrease tilt
speed by x level (x=1…10).
Press button 1 time to return to CONTROL mode and LED will turn to
BLUE
again.
4.1. DEACTIVATE SBUS JOYSTICK MODULE
If joystick is in active state, hold and press button 3 secs will change its state to inactive state
LED Status on gimbal:
GREEN
4.2. ACTIVATE SBUS JOYSTICK MODULE
4
T-
T+
