Gremo1050F4 Instruction manual
6.18 Working underneath electric power lines
6.18
Working underneath electric power lines
Fig. 113 Working underneath
electric power lines
DANGER
Never work underneath electric power lines.
There is a large risk that the crane touches the power
lines, and this may cause a fatal accident!
A risk distance of at least 10 m must be observed!
DANGER
If the machine comes in contact with overhead power
lines. Remain in your seat and call for assistance!
Danger!
Remain in your seat. Wait for assistance!
6.19
Road transport
6.19.1
Before starting
Fig. 114 Indicators and rear mirrors
Fig. 115 Rear light ramp
Fit the indicators and rear mirrors as well as the rear light
ramp with the Slow Vehicle sign. Ensure that the driving
lights and the indicators are working and that the rear
mirrors are adjusted correctly. Check the coolant level and
the hydraulic oil level in the hydraulic tank.
Ensure that you have fuel in the tank! Thus you avoid
running out of fuel on a public road, and thus avoid
becoming a danger to other traffic.
NOTICE
If the weather is hot and dry, you should clean the
radiators before the transport. During the transport,
especially in hot weather, you should continuously check
water and oil temperatures. If the temperature is too
high, then the best way to decrease it is to let the
machine roll with smallest possible strain. Turn down the
Speed Potentiometer but keep relatively high engine
revs in order to keep the fan and the water pump
working properly.
The control system adjusts the diesel engine to run at
exactly the revs required to keep the selected speed. The
smaller rolling resistance, the lower engine revs.
137