GREISINGER USB 100, Installation And Operating Manual

Page: 2 / 4

S58.0.01.6C-03 Page 2 of 4
Content
1. Intended use .......................................................................................................................................... 2
2. General advice ...................................................................................................................................... 2
3. Safety instructions ................................................................................................................................. 2
4. Installation ............................................................................................................................................. 3
5. Specification .......................................................................................................................................... 3
5.1 System requirements: ....................................................................................................................................... 3
6. Disposal notes ....................................................................................................................................... 4
7. Frequently asked questions (FAQ) ........................................................................................................ 4
7.1 How to check whether the adaptor has been installed correctly and via which COM-port can I approach the
installed adaptor? .............................................................................................................................................. 4
7.2 How to change the COM-port of the adaptor? ................................................................................................. 4
7.3 How to find out the used version of the driver? ............................................................................................... 4
1. Intended use
The level converter enables the connection of T-Logg module to the USB-interface of your PC.
Applications:
Exchange data capture
Configuration of T-Logg function
Readout measuring data storage
etc.
2. General advice
Read through this document attentively and make yourself familiar to the operation of the device before you
use it. Keep this document in a ready-to-hand way in order to be able to look up in the case of doubt.
3. Safety instructions
This device was designed and tested considering the safety regulations for electronic measuring devices.
Faultless operation and reliability in operation of the measuring device can only be assured if the General
Safety Measures and the devices specific safety regulation mentioned in this
user’s manual are considered.
1. Faultless operation and reliability in operation of the measuring device can only be assured if the device
is used within the climatic conditions specified in the chapter “Specifications“.
2. By faulty handling of the interface adapter a damage of the device cannot be excluded. Likewise a
damage of your attached device is possible.
In such case we cannot assume any warranty.
The manufacturer will not assume any warranty for damages to other devices resulting by use of the
interface adapter.
3. Standard regulations for operation and safety for electrical, light and heavy current equipment have to be
observed, with particular attention paid to the national safety regulations.
4. When connecting the device to other devices (e.g. the PC) the interconnection has to be designed most
thoroughly, as internal connections in third-party devices (e.g. connection of ground with protective
earth) may lead to undesired voltage potentials.
5. The device must be switched off and must be marked against using again, in case of obvious
malfunctions of the device which are e.g.:
visible damage
no pre-scripted working of the device
storing the device under inappropriate conditions for longer time
When not sure, the device should be sent to the manufacturer for repairing or servicing.