GREISINGER GTF 101-Ex Series Operating Manual Download Page 9

Z31.0.XY.6C-09

Operating manual GTF 102-Ex... und GTF 101-Ex...

page 9

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                         

_______________________________________________________________________________________________________________________

         

6. Ordering information

6.1 GTF 

102-Ex....

GTF 102-Ex-

Ordering example:

GTF 102-Ex; Pt 100, medium-temperature > 100°C; ambient temperature: 60°C, 
kind of screw thread: G-screw thread, size of screw thread: 1/2", neck tube length 50mm,  probe diameter: 6mm, 
probe length 200mm, cable length 3m, protection type "i"; Ex-zone 1

GTF 102-Ex-

P

M

A

1

4

0 5 0

6

0 2 0 0

3

i

0 1

Sensor-element:

P: Pt 100
S: Pt 1000
T: Thermocouple type K
U: Thermocouple type N

Neck tube:

K: without neck tube ( T< =100°C)
M: with neck tube     (  T > 100°C)

Probe diameter :

x: 3,4,5,6 or 8mm

Hint:

- For zone 0/1, 20/21 only 6mm or 8mm available
- For D= 3mm: (Pt 100 or Pt 1000 only)
  

·

 minimum length is 60mm 

  

· 

probe diameter is reduced; from D =6mm to D = 3mm

Probe length :

xxxx: length in mm 

Protection type:

e: increased safety (hier em); not permitted in  zone 0/1 or zone 20/21
i:  intrinsic safety

Hint:

protection class "em" : devices beyond the explosive hazardous zone need 
no ATEX certification  (mind safety instructions !)

Potentially explosive atmospheres:

Gases:
 00: zone 0/1 (probe-tube in zone 0, head in zone 1)
 01: zone 1
 02: zone 2
Dusts:
20:  zone 20/21 (probe-tube in zone 20, head in zone 21)
21:  zone 21 
22:  zone 22

Hint:  

The probe can not be used completely in zone 0 or zone 20.    

Ambient temperature :

A:  Standard
       -20°C....+60°C 
H: higher ambient temperature
       -20°C...+80°C   
     only for protection type "i" available

Kind of screw thread:

1: G-screw thread (zylindric)
2: M-screw thread (metric)
other screw thread on request

Size of screw thread:

1: 1/8"                                                   

Hint:

2: 1/4"                                                   For zone 0/1 or zone 20/21 
3: 3/8"         for G-screw thread          only G 3/8" , G 1/2" or G 3/4" 
4: 1/2"                                                   available.
5: 3/4"
6: 8x1
7: 10x1       for M-screw thread
8: 14x1

Neck tube length:

xxx: length in mm 
       (e.g. 050 = 50mm)

Cable length  (4-wire):

x: length in m  (e.g. 1 = 1m)

HL

FL

GTF 102-Ex-.M.

FL

GTF 102-Ex-.K.

Summary of Contents for GTF 101-Ex Series











Reviews: