GREISINGER GE 014 Operating Manual Download Page 3

Z03.0.0X.6C-11 

 Operating manual GE xxx serie 

page 3 of 12 

 

 

 

 

 

The manufacturer will assume no liability or warranty in case of usage for other purpose than the 
intended one, ignoring this manual, operating by unqualified staff as well as unauthorized 
modifications to the device. 

2.2  Safety guidelines 

This device has been designed and tested in accordance with the safety regulations for electronic 
devices. 
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety 
measures and special safety advises given in this manual will be adhered to when using the 
device. 

2.3  Safety signs and symbols 

The following signs in this document highlight warnings: 

 

Caution! 

This symbol warns of imminent danger, death, serious injuries and 

significant damage to property at non-observance. 

 

This symbol indicates danger for living tissue as well as a variety of materials, 
which can be damaged or destroyed when coming into contact with this 
chemical. Caustic effect, protective equipment required!

 

 

This Symbol indicates dangers to all living beings that may result in death or 
acute or chronic health hazards when inhaled, swallowed, or absorbed 
through the skin of this chemical. 

 

This Symbol indicates irritant substances that can cause inflammation on 
short-term, prolonged or repeated contact with the skin or mucous 
membranes. 

 

Attention!

 This symbol warns of possible dangers or dangerous situations 

that can provoke damage to the device or environment at non-observance. 

 

Note!

 This symbol point out processes which can indirectly influence 

operation, possibly cause incorrect measurement or provoke unforeseen 
reactions at non-observance. 

 

This symbol instructs the use of eye protection which protects the eyes from 
harmful influences when working with powerful light, UV radiation, laser, 
chemicals, dust, splinters or weather influences.

 

 

This symbol instructs the use of protective gloves which offer protection from 
mechanical, thermal, chemical, biological or electrical hazards.

 

 

 

Summary of Contents for GE 014













Reviews: