background image

• Children should be supervised

to ensure that they do not play
with the power tool.

• Do not touch moving

hazardous parts before the
machine is disconnected from
the mains and the moving
hazardous parts have come to a
complete stop. Never to
replace the non-metallic
cutting means with metallic
cutting means.

• Never operate the machine

while people, especially
children, or pets are nearby.

• Always be sure of your footing

on slopes.

• Walk, never run.

5

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.

Symbol

Explanation

Read and understand all instructions
before operating the product, follow
all warnings and safety instructions.

Wear head protection.

Wear eye and ear protection.

Wear safety footwear.

Symbol

Explanation

Wear protective gloves.

Do not expose the product to rain or
moist conditions.

Thrown objects can ricochet and re-
sult in personal injury or property
damage. Wear protective clothing and
boots.

Beware of thrown or flying objects.
Keep all bystanders, especially chil-
dren and pets, at a safe distance at
least 15 m away from the operating
area.

Keep bystanders a safe distance away
from the product.

6

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL

MEANING

DANGER

Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.

WARNING

Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.

CAUTION

Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.

CAUTION

(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.

7

RECYCLE

Separate collection. You must not discard
with usual household waste. If it is necessa-
ry to replace the machine, or if it is no more
use to you, do not discard it with household
waste.

5

English

EN

Summary of Contents for STF312












Reviews: