GreenWorks LMF414 Operator'S Manual Download Page 5

• Always wear safety glasses or safety goggles during

operation and while performing an adjustment or

repair to protect your eyes. Thrown objects that

ricochet can cause serious injury to the eyes.

Always use a face or dust mask if the operation is

dusty.

• Keep clear of the discharge opening at all times. Do

not put hands or feet near rotating parts or under the

cutting deck. Contact with the blade can amputate

hands and feet.

• Plan your mowing pattern to avoid discharge of

material toward roads, sidewalks, bystanders and

the like. Also, avoid discharging material against

walls or obstructions, which may cause discharged

material to ricochet back toward the operator.

• To help avoid the blade or an injury from a thrown

objects, stay in the operator zone behind the

handles.

• A missing or damaged discharge cover can cause

blade contact or injuries from thrown objects.

• Objects struck by the lawn mower blade can cause

severe injuries to persons. The lawn should always

be carefully examined and cleared of all objects

prior to each mowing.

• Stop the blade when crossing gravel drives, walks

or roads.

• If lawn mower strikes a foreign object, follow these

steps:
• Release the bail switch to disengage the motor.
• Remove the battery.
• Inspect for damage.
• Repair and damaged parts before restarting and

operating the lawn mower.

• Dress properly, do not wear loose clothing or jewelry

that can be caught in moving parts. Use of safety

gloves and proper footwear is recommended when

working outdoors. Wear sturdy, rough-soled work

shoes and close-fitting slacks and shirts. Shirts and

pants that cover the arms and legs and steel-toed

shoes are recommended. Never operate this

machine in bare feet, sandals, slippery or lightweight

(e.g., canvas) shoes.

• Avoid dangerous environments, do not use the lawn

mower in damp/wet locations or if it is raining.

• When not in use the mower should be store in a dry

and locked location. Always remove the battery from

the mower before storing.

• Mow only in daylight or good artificial light. Walk,

never run while operating.

• If the equipment should start to vibrate abnormally,

immediately stop the motor, remove the battery and

check for the cause. Vibration is generally a warning

that the machine is not functioning properly.

• Before cleaning the machine, unclogging or

removing the grass bag, mulching insert, or side

discharge chute, turn the motor off and wait until the

blade comes to a complete stop, then remove the

battery pack. The cutting blade continues to rotate

for a few seconds after the motor is shut off. Never

perform these functions until you are sure the blade

has stopped rotating.

• Keep cutting edges clean and sharp to ensure best

performance.

• Periodically inspect safety devices and cords for

damage. If damaged do not operate the unit until it

has been repaired by an authorized service

professional.

• Never operate the mower without the proper

discharge cover, grass bag, mulching insert, side

discharge chute, or other safety devices in place

and working. Never operate the mower with

damaged safety devices. Failure to do so can result

in personal injury.

• Use only the following approved batteries and

chargers. Non approved batteries and chargers may

cause damage to the mower or injure the operator.

• Do not dispose of the battery in a fire. The cells

could catch fire or explode. Check with local codes

and waste management for proper disposal

instructions.

• Do not open or mutilate the battery. Electrolytes

contained within the battery are corrosive and may

cause damage to eyes or skin if released. It may be

toxic if swallowed.

• Exercise care in handling batteries to avoid shorting

the battery with conducting materials such as rings,

bracelets, keys, etc. The battery or conductor may

overheat and cause burns if contact with said

materials is made.

2.3

SLOPE OPERATION

Slopes are a major factor related to slip-and-fall

accidents, which can result in severe injury. Operation

on slopes requires extra caution. If you feel uneasy on a

slope, do not mow it.
Do:
• Mow across the face of slopes; never mow up and

down. Exercise extreme caution when changing

direction on slopes.

• Watch for holes, ruts, rocks, hidden objects, or

bumps which can cause you to slip or trip. Tall grass

can hide obstacles.

Do not:
• Do not mow near drop-offs, ditches or

embankments; you could lose your footing or

balance.

• Do not mow slopes greater than 15 degrees, as

shown on the slope gauge.

• Do not mow on wet grass. Unstable footing could

cause slipping.

5

English

EN

Summary of Contents for LMF414





























Reviews: