GreenWorks LMF401 Operator'S Manual Download Page 4

1

DESCRIPTION

1.1

PURPOSE

This machine is used for domestic lawn mowing. The cutting
blade must be approximately parallel to the ground. All four
wheels must touch the ground while you mow.

1.2

OVERVIEW

Figure 1-11.

1

Bail lever

2

Start button

3

Upper handle

4

Lower handle

5

Rear discharge door

6

Height adjustment lever

7

Battery door

8

Grass catcher

9

Side discharge chute

10

Mulch plug

11

Handle knob

12

Knob

13

Bolt

14

Side discharge door

15

Battery pack

16

Battery release button

17

Safety key

18

Mounting screw

19

Spacer

20

Blade

2

SAFETY

 

WARNING

Make sure that you do/obey all safety instructions.

Refer to Safety Manual.

3

INSTALLATION

 

WARNING

Do not change or make accessories that are not
recommended by the manufacturer.

 

WARNING

Do not put in the safety key or the battery pack until you
assemble all the parts.

3.1

UNPACK THE MACHINE

 

WARNING

Make sure that you correctly assemble the machine before
use.

 

WARNING

If the parts have damage, do not use the machine.

If you do not have all the parts, do not operate the
machine.

If the parts are damaged or missing, speak to the service
center.

1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local

regulations.

3.2

UNFOLD THE LOWER HANDLE

Figure 2.

1. Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three positions on

the brackets.

4. Turn the handle knobs 90° until they engage the holes in

the brackets.

 

NOTE

Make sure that the two handle knobs are in the same
position.

 

WARNING

Do not make damage to the cables when you fold or unfold
the handle.

3.3

INSTALL THE UPPER HANDLE

Figure 3.

1. Align the holes in the upper handle and the lower handle.
2. Put the bolts through the holes.
3. Tighten the knobs onto the bolts.
4. Do the same operation on the other side.

3.4

INSTALL THE GRASS CATCHER

Figure 4.

1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door and hold it.

4

English

EN

Reviews: