GreenWorks HT-240-T Owner'S Manual Download Page 13

13

MAINTENANCE

W A R N I N G

To avoid risk of fire, electric shock, or electrocution:

• Do not use a damp cloth or detergent on the battery or battery charger.
• Always remove the battery pack before cleaning, inspecting, or performing any maintenance 

on the hedge trimmer.

Cleaning

• Wipe the outside of the hedge trimmer with a dry, soft cloth. Do not hose down or wash with 

water.

• Scrape the guard to remove dried clippings and mud.

• Brush or blow dust, debris, and grass clippings out of the air vents. Keep them free of obstruction.

Battery Pack

• Store the battery pack fully charged.

• Once the charging light turns green, remove the battery from the charger.

• Do not store the battery pack on the tool.

• After charging, the battery pack may be stored in the charger, as long as the charger is not 

plugged in.

Charger Maintenance

• Keep the charger clean and clear of debris. Do not allow foreign material to get into the recessed 

cavity or onto the contacts. Wipe the charger clean with a dry cloth. Do not use solvents or water, 

and do not place the charger in wet conditions.

• Unplug the charger when there is no battery pack in it.

• Fully charge the batteries before placing them in storage.

• Store the charger at normal room temperaturDo not store it in excessive heat. Do not use the 

charger in direct sunlight. Recharge at room temperature between 43˚F and 104˚F (6˚C and 

40˚C). If the battery pack is hot, allow it to cool down before recharging.

Summary of Contents for HT-240-T




















Reviews: