EN - 22
MAINTENANCE
QUICK WINTERIZING PROCEDURE
If you cannot do the Optimum Winterizing procedure, you can still protect your pressure washer from
winter damage by doing below:
Ŷ
Disconnect all water connections.
Ŷ
Turn on the machine for a few second, until the remaining water in the pump exits. Turn off immediately.
Ŷ
Do not allow high-pressure hose to become kinked.
Ŷ
Store the machine and accessories in a room that does not reach freezing temperatures. Do not store
near furnace or other sources of heat as it may dry out the pump seals.
C A U T I O N :
Drain gun assembly of any remaining water. Aim gun downwards and squeeze trigger.
SHUTTING DOWN AND CLEANING UP
Ŷ
(If you are not using detergent, go directly to Step 2.) When you have finished using the detergent
LQMHFWLRQV\VWHPILOOGHWHUJHQWERWWOHZLWKFOHDQZDWHU6LSKRQZDWHUDWORZSUHVVXUHIRURQHPLQXWHVR
that all detergent is flushed through system. Remove detergent bottle and rinse it thoroughly.
Ŷ
Disconnect the garden hose from the water inlet on the unit.
Ŷ
Press trigger to release any remaining water pressure.
Ŷ 7XUQWKHVZLWFKWR2))SRVLWLRQ
Ŷ
Unplug the power cord from the outlet.
Ŷ
Engage gun safety lock.
W A R N I N G
Turn off water supply and squeeze trigger to depressurize the unit. Failure to do so could result in
SHUVRQDOLQMXU\GXHWRGLVFKDUJHRIKLJKSUHVVXUHZDWHU
TAKING A BREAK
,IWDNLQJDEUHDNRI¿YHPLQXWHVRUPRUH
Ŷ
Engage gun safety lock.
Ŷ
Turn unit to “OFF” (O) position.
Ŷ
Unplug the power cord from the outlet.
I M P O R T A N T :
The use of a pump protector is recommended when storing to help prevent a against freezing over the
winter months. It also help prevent the seals from drying out while sitting in storage in all climates.