8
EN
English
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read and understand the instructions in the battery and
charger manual.
1.
Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2.
Push the battery pack into the battery compartment until
the battery pack locks into place.
3.
When you hear a click, the battery pack is installed.
8.5
REMOVE THE BATTERY PACK
1.
Push and hold the battery release button (1).
2.
Remove the battery pack from the machine.
9
OPERATION
IMPORTANT
Before you operate the machine, read and understand the
safety regulations and the operation instructions.
WARNING
Be careful when you operate the machine.
9.1
START THE MACHINE
1. Pull back on the lock-out button (1) and pull the trigger
(2). Once the machine is running you can release the lock-
out button.
9.2
STOP THE MACHINE
1. Release the trigger to stop the machine.
9.3
ADJUST THE DEPTH OF CUT
1.
Remove the battery pack.
2.
Loosen the depth adjustment knob to increase or decrease
the depth.
Depth Adjustment Knob
3.
Adjust the depth so that the blade barely touches the
ground when the machine is held in a normal operating
posture.
4.
Tighten the depth adjustment knob.
5.
Standing in a normal working position, check the depth of
cut again and correct if necessary.
6.
Replace the battery pack once all adjustments are
complete.
9.4
REPLACE THE BLADE
NOTE
If the blade worn out, replace it with a new one (not
provided).
1.
Use a metal rod (1) to fix the blade.
2.
Remove the nut (2) by turning it clockwise with the
wrench (4) provided.
3.
Remove the washer (3).