Problem
Possible cause
Solution
The machine does
not start.
The chain brake is
engaged.
Pull the chain
brake in the direc-
tion of the user to
disengage it.
The machine and
battery are not
connected correct-
ly.
Make sure that the
battery release
button clicks when
you install the bat-
tery pack.
The battery level
is low.
Charge the battery
pack.
The lock out but-
ton and the trigger
are not pushed at
the same time.
1. Push the lock-
out button and
hold it.
2. Push the trig-
ger to start the
machine.
The battery is too
hot or too cold.
Refer to battery
and charger man-
ual.
The motor runs,
but the chain does
not cut correctly,
or the motor stops
after around 3 sec-
onds.
The machine is in
the protection
mode to protect
the PCB.
Release the trigger
and start the ma-
chine again. Do
not force the ma-
chine to cut.
The battery is not
charged.
Charge the battery.
Refer to the bat-
tery and charger
manual for correct
charging proce-
dures.
The chain is not
lubricated.
Lubricate the
chain to decrease
the friction. Do
not let the guide
bar and the chain
operate without
sufficient lubri-
cant.
Incorrect battery
storage tempera-
ture
Cool the battery
pack until it de-
creases to the am-
bient temperature.
8
TECHNICAL DATA
Voltage
40 V DC
No load speed
20 m/s
Guide bar length
400 mm
Chain stop
< 0.12 s
Chain oil capacity
180 ml
Weight (without battery
pack)
3.8 kg
Measured sound pressure
level
L
pA
= 92 dB(A), K
pA
= 3
dB(A)
Guaranteed sound power
level
L
wA.d
= 104 dB(A)
Vibration
4.9 m/s
2
, K = 1.5 m/s
2
Chain
90PX056X/CL14356
Guide bar
164MLEA041/
M1431656-1041TL
Battery model
G40B2/G40B25/G40B4/
G40B5/G40B6 and other
BAF series
Charger model
2910907/G40C and other
CAF series
9
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner’s manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
GLOBGRO AB
Globe Group Europe
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name:
Peter Söderström
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Chainsaw
Model:
GD40CS18(CSF404)
9
English
EN
Summary of Contents for CSF404
