GreenWorks BL24B02 Operator'S Manual Download Page 8

Clear the unwanted material out of the air vent with a
vacuum cleaner.

Do not spray the air vent or put the air vent in solvents.

Clean the housing and the plastic components with a
moist and soft cloth.

13

TRANSPORTATION AND

STORAGE

 

WARNING

Remove the battery pack from the machine before
tranportation and storage.

13.1 MOVE THE MACHINE

Only hold the machine with the handgrip.

13.2 STORE THE MACHINE

Clean the machine before storage.

Make sure that the motor is not hot when you store the
machine.

Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:

Replace the damaged parts.

Tighten the bolts.

Speak to a person of an approved service center.

Store the machine in a dry area.

Make sure that children cannot come near the machine.

14

TROUBLESHOOTING

PROBLEM

POSSIBLE
CAUSE

SOLUTION

The motor does
not start when
you pull the trig-
ger.

The battery pack is
not installed tight-
ly.

Make sure that
you tighlty install
the battery pack in
the machine.

The battery pack is
out of power.

Charge the battery
pack.

The machine does
not start.

The power switch
is defective.

Replace the defec-
tive parts by an ap-
proved service
center.

The motor is defec-
tive.

The PCB board is
defective.

The air does not
flow through the
tube when you
start the machine.

The air inlet or
tube outlet has a
blockage.

Remove the block-
age.

15

TECHNICAL DATA

Voltage

24 V

Air volume

320 CFM

Air speed

90 MPH (145 Km/h)

Weight (without
battery pack)

3.7 lbs. (1.7 kg)

Battery model

BAG708 and other BAG series

Charger model

CAG801 and other CAG series

The recommended ambient temperature range:

Item

Temperature

Blower storage temperature
range

-4°F (-20°C) - 158°F (70°C)

Blower operation tempera-
ture range

-4°F (-20°C) - 104°F (40°C)

Battery charging temperature
range

39°F (4°C) - 104°F (40°C)

Charger operation tempera-
ture range

39°F (4°C) - 113°F (45°C)

Battery storage temperature
range

1 year: 32°F (0°C) - 73°F
(23°C)

3 months: 32°F (0°C) -
113°F (45°C)

1 months: 32°F (0°C) -
140°F (60°C)

Battery discharging tempera-
ture range

6.8°F (-14°C) - 113°F (45°C)

16

LIMITED WARRANTY

YEAR 

ANS 

AÑOS

LIMITED WARRANTY

GARANTIE LIMITÉE

GARANTÍA 

LIMITADA

3

Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.

8

English

EN

Summary of Contents for BL24B02

























Reviews: