ENGLISH(Original Instructions)
PROBLEM
Motor buzzes but fails
to run.
No Water
POSSIBLE CAUSE
Supply voltage below minimum.
System has residual pressure.
Voltage loss due to
extension cord.
Pressure washer not used for
long periods.
Residual friction among com-
ponents. Unit might hum.
Quick connect assembly is
attached in reverse.
Water supply is OFF.
Kink in the garden hose.
SOLUTION
Verify that only the pressure
washer is running on this circuit.
Turn unit “OFF”, squeeze trigger
on spray wand to release pressure,
then turn unit “ON”
Unplug any extension cords attached
and plug the unit directly
into the outlet.
Call the Toll-Free Hotline.
Disconnect water supply and
power ON for 2 to 3 seconds,
repeat couple times or until the
motor starts.
Verify that Inlet adapter (G2) is
attached to machine’s water inlet
and that the quick connect coupler
(G1) is attached to garden hose.
Turn ON water supply.
Remove kink in garden hose.
12
DISPOSAL
This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
