manualshive.com logo in svg

GreenWorks 48SPM21, Operator'S Manual, Page: 10 / 15

Share
Download
GreenWorks 48SPM21 Operator'S Manual Download Page 10

It is necessary to remove the safety key and the battery

pack to prevent accidental startup or unapproved use.

The storage switch does not replace this function.

10

TROUBLESHOOTING

Problem

Possible cause

Solution

The handle is

not in position.

The bolts are not

engaged correct-

ly.

Adjust the height

of the handle

and make sure

that the knobs

and bolts are

aligned correctly.

The machine

does not start.

The battery ca-

pacity is low.

Charge the bat-

tery pack.

The bail switch is

defective.

Replace the bail

switch.

The battery key

is not put in.

Put in the battery

key.

The machine

cuts grass un-

evenly.

The lawn is

rough.

Examine the

mowing area.

The blade height

is not set cor-

rectly.

Move the wheels

to a higher posi-

tion.

The machine

does not mulch

correctly.

Wet grass clip-

pings attach to

the deck.

Wait until the

grass dries be-

fore mowing.

The mulch plug

is missing.

Install the mulch

plug.

The machine is

hard to push.

The grass is too

tall, or the blade

height is too low.

Increase the

blade height.

The grass catch-

er and the blade

drags in thick

grass.

Empty the grass

clippings from

the grass catch-

er.

Problem

Possible cause

Solution

There is a high

vibration in the

machine.

The blade is un-

balanced and

worn.

Replace the

blade.

The engine shaft

is bent.

1. Stop the en-

gine.

2. Remove the

safety key

and battery

pack.

3. Disconnect

the power

source.

4. Inspect for

damage.

5. Repair the

machine be-

fore you start

it again.

The machine

stops during

mowing.

The blade height

is too low.

Increase the

blade height.

The battery pack

is out of power.

Charge the bat-

tery pack.

The grass clip-

pings attach to

the deck or the

blade.

Remove the bat-

tery pack and

check the deck.

Operation tem-

perature of the

machine is too

high.

Cool the ma-

chine.

* If you cannot find the solution to these problems, go to

the service center.

11

TECHNICAL DATA

Voltage

48 V

No load speed

2800 RPM

Height adjustments

1 3/8 - 3 3/4” (3.5 - 9.5

cm)

Self-propelled speed

2.3-4.44 fps (0.7-1.35 m/s)

Functions

3-in-1: Mulching & Rear

Bagging & Side Discharge

Capabilities

Weight (without battery

pack)

31 kg (68 lbs.)

Battery model

BAM706 and other BAM

series

Charger model

CAM803 and other CAM

series

11

English

EN

Summary of Contents for 48SPM21
















Reviews:

No comments