GreenWorks 37032a, Owner'S Manual

Page: 10 / 16

Fig.4
OPERATION
10
Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not
in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.
Battery products are always in operating condition. Therefore, the switch should always be locked when not in use or
carrying at your side.
To prevent gear damage, always allow the chuck to come to a complete stop before changing the direction of rotation.
W A R N I N G
W A R N I N G
C A U T I O N
To remove:
■ Depress the latch on the battery pack.
■ Remove the battery pack from the drill.
SWITCH TRIGGER
To turn the drill ON, depress the
switch trigger. To turn it OFF ,
release the switch trigger.
Coupler
Adaptor bit
Hex Coupler
Variable speed switch trigger
Foward
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with
decreased trigger pressure.
NOTE: You might hear a whistling or ringing noise from the switch during use. Do not be concerned; this is a normal
part of the switch function.
DIRECTION OF ROTATION SELECTOR (FORWARD/REVERSE/CENTER LOCK)
The direction of bit rotation is reversible and is controlled by a selector located above the switch trigger. With the impact
driver held in normal operating position, the direction of rotation selector should be positioned to the left of the switch
trigger for forward rotation. The direction is reversed when the selector is to the right of the switch trigger .
INSTALLING/REMOVING BITS
R everse
To stop the drill, release the switch trigger and allow the chuck to come to a complete stop.
Fig.3