14
OPERATION
W A R N I N G
Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do
so could result in objects being thrown into your eyes, resulting in possible serious injury..
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this tool. The
use of attachments or accessories not recommended can result in serious personal injury.
APPLICATIONS
You may use this tool for the purposes listed below:
•
Cutting wood surfaces
•
Cutting thin sheet metal
•
Cutting plastics and laminates
INSERTING AND RELEASING BATTERY PACK
Slide charged battery pack into the housing until the battery pack locks into position.
Your tool is equipped with a secondary locking latch to prevent the battery pack from completely
falling out of the handle, should it become loose due to vibration.
To remove the battery pack, press the battery pack release button and slide the battery pack
forward (Fig. 1).
Press the battery pack release button again and slide the battery pack completely out of tool
housing.
SWITCH LOCK
The switch lock is designed to prevent accidental starts. To operate switch, press the switch lock
button with your thumb to the unlock symbol. To lock the switch, press the switch lock button to
the lock symbol (Fig. 1).
VARIABLE SPEED CONTROLLED TRIGGER SWITCH
Your tool is equipped with a variable speed trigger switch. The tool can be turned "ON" or "OFF"
by squeezing or releasing the trigger. The speed can be adjusted from the minimum to maximum
nameplate SPM by the pressure you apply to the trigger. Apply more pressure to increase the
speed and release pressure to decrease speed (Fig. 1).
Summary of Contents for 36102a
Page 20: ...20 EXPLODED VIEW...
